 |
So, I’ve finally got round to uploading some pictures. I thought I’d upload a select few – quality rather than quantity. First there is the new exhaust system. It’s out of the way of the cooling hoses and just about everything else (I did have to cut a hole in the bonnet for one of the […] |
|
I’m due/hope to be in the workshop on the following dates: May 2nd May 16th May 22nd I’m then planning to drop the car off at the exhaust fabricator’s workshop on May 17th. The exhaust will only take 3 days to make so I’ll have it back the following weekend. I’m planning to have the car finished […] |
|
I’ve made some major enhancements to the cooling side of things over the last couple of months. Firstly, I’ve moved the swirl pot to the rear of the engine and routed the inlet and outlet piping past the exhaust side of the engine. The oil cooler has returned, but this time it’s mounted infront of […] |
|
[singlepic id=533 w=160 h=120 float=left] As you can see the front passenger side was the first part of the car to hit the tyre wall. I’m amazed how little damage there was though as it is only fibreglass and thin fibreglass at that, but I guess the bodywork and undertray mated together made for a […] |
